Igmp Query Commands (Layer 2); Ip Igmp Snooping Querier - SMC Networks TigerSwitch SMC6128PL2 Management Manual

IGMP Query Commands (Layer 2)

IGMP Query Commands (Layer 2)
Command
ip igmp snooping
querier
ip igmp snooping
query-count
ip igmp snooping
query-interval
ip igmp snooping
query-max-response-ti
me
ip igmp snooping
router-port-expire-time

ip igmp snooping querier

This command enables the switch as an IGMP querier. Use the no form to
disable it.
Syntax
[no] ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
Example
Console(config)#ip igmp snooping querier
Console(config)#
M
Function
Allows this device to act as the querier
for IGMP snooping
Configures the query count
Configures the query interval
Configures the report delay
Configures the query timeout
F
ULTICAST ILTERING
C
OMMANDS
Mode Page
GC 4-275
GC 4-276
GC 4-277
GC 4-277
GC 4-278
4-275