C
L
OMMAND
INE
• You can specify three authentication methods in a single command to
indicate the authentication sequence. For example, if you enter
"authentication login radius tacacs local," the user name and
password on the RADIUS server is verified first. If the RADIUS
server is not available, then authentication is attempted on the
TACACS+ server. If the TACACS+ server is not available, the local
user name and password is checked.
Example
Console(config)#authentication login radius
Console(config)#
Related Commands
username - for setting the local user names and passwords (4-36)
authentication enable
This command defines the authentication method and precedence to use
when changing from Exec command mode to Privileged Exec command
mode with the enable command (see page 4-27). Use the no form to
restore the default.
Syntax
authentication enable {[local] [radius] [tacacs]}
no authentication enable
- local - Use local password only.
- radius - Use RADIUS server password only.
- tacacs - Use TACACS server password.
Default Setting
Local
Command Mode
Global Configuration
4-98
I
NTERFACE