Restoring The Settings To The Factory Condition (Factory Reset) - Roland F-110 Owner's Manual

Various Settings
2.
Press and hold the [Others] button and use the [–]
or [+] button to select "buP."
The display will indicate "buP" and the [
blink.
fig.d-buP.eps_88
3.
Press the [ ] button.
The display will indicate "Sur," and the [
[ ] button will blink.
fig.d-Sur.eps_88
If you decide not to save the settings, press the [
button.
4.
To save the settings, press the [
The "buP" message flashes in the display.
Never turn off the power while "buP" is blinking in the
display.
When the memory backup has been completed, the display
will indicate "Fnc."
fig.d-Fnc.eps_88
For details on the settings stored by the Memory Backup
operation, refer to "Parameters Stored in Memory
Backup" (p. 76).
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
60
Restoring the Settings to the Factory
Condition (Factory Reset)
] button will
] button and
]
] button.
1.
2.
fig.d-Fct.eps_88
3.
fig.d-Sur.eps_88
The settings you've changed in Function mode can be
restored to their factory-set condition. This operation is called
"Factory Reset."
Execute this operation if you want the settings you've stored
using Memory Backup to be returned to their original state.
When you execute "Factory Reset," all settings you've
stored up to that point will be cleared, and reset to their
factory-set condition.
Executing this operation will not erase the songs from
internal memory. If you want to erase all songs from the
F-110's internal memory, refer to "Deleting All Songs"
(p. 43).
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
Press and hold the [Others] button and use the [–]
or [+] button to select "Fct."
The display will indicate "Fct" and the [
blink.
Press the [ ] button.
The display will indicate "Sur," and the [
[ ] button will blink.
If you decide not to execute the Factory Reset, press the
[ ] button.
] button will
] button and