Preventing Double Notes When Working With A Sequencer (Local Control) - Roland F-110 Owner's Manual

3.
Use the [-] [+] buttons to change the setting.
Setting Explanation
When you select a song from a VIMA CD-ROM
(VIMA TUNES), recommended tones will
automatically be assigned to the F-110's
[E. Piano], [Strings] and [Others] tone
buttons.
The recommended tones are not used, and
only the F-110's internal tones can be
selected.
This is set to "On" at the factory.
4.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Preventing Double Notes when
Working with a Sequencer
(Local Control)
When you have a MIDI sequencer connected, set this
parameter to Local Off.
Since the Thru function of your sequencer will normally be
turned on, notes played on the keyboard or played back by
the recorder will be transmitted to the sound generator by
the two routes (1) and (2) shown in the illustration, causing
notes to be sounded in duplicate or to be cut off unnaturally.
To prevent this, the setting called "Local Off" is used to
disconnect the route in (1).
fig.LocalControl.eps_88
Local On
(1)
MIDI
Sound
IN
Generator
MIDI
OUT
Each note played is sounded twice
Sequencer
MIDI
OUT
Memory
MIDI
IN
(2) Soft Thru On
Local On:
The keyboard and recorder are connected to the internal
sound generator.
fig.LocalOn.eps_88
Sound is emitted
Sound Generator
Local On
Local Off:
The keyboard and recorder are not connected to the internal
sound generator. No sound will be produced by the
keyboard when it is played.
fig.LocalOff.eps_88
No sound produced
Sound Generator
Local Off
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Others] button and use the [–]
or [+] button to select "L.Ct."
3.
Release the [Others] button to see the current
setting.
4.
Use the [-] [+] buttons to change the setting.
Setting Explanation
Local Control is set to On.
The keyboard and recorder are connected to
the internal sound generator.
Local Control is set to Off.
The keyboard and recorder are not
connected to the internal sound generator.
Playing the keyboard or playing back a song
will not produce sound.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Various Settings
57