Song Playback Settings; Selecting The Part That Is Muted By The [E. Piano] Button (Accomp Track); Midi Settings; Switching Vima Tunes Recommended Tones (Recommended Tone) - Roland F-110 Owner's Manual

Various Settings

Song Playback Settings

Selecting the Part that is Muted by the
[E. Piano] Button (Accomp Track)
Here's how to switch the part that will be muted when you
press the [E. Piano] track button and turn off its light.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Song] button and use the [–] or
[+] button to select "A.tr."
3.
Release the [Song] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
Both the accompaniment and rhythm will be
muted.
Only the accompaniment will be muted. (The
rhythm will not be muted.)
Only the rhythm will be muted.
(The accompaniment will not be muted.)
The change you make to this setting will not be applied
until you select a song.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
56

MIDI Settings

Here you can make various MIDI-related settings for the
F-110.
For more about MIDI, refer to "Connecting to MIDI Devices"
(p. 64).
Switching VIMA TUNES Recommended
Tones (Recommended Tone)
You can connect the F-110's MIDI In port to the MIDI OUT
port on your computer's MIDI interface and play back
separately sold CD-ROMs created for the VIMA (VIMA TUNES).
This requires the "VIMA TUNES PLAYER" software, which is
available free of charge on Roland's web site:
http://www.roland.com/products/en/
* Please visit the F-110 product page from Alphabetical index,
then open the "Download" page.
Songs on VIMA CD-ROMs (VIMA TUNES) are programmed
with "recommended tones" suitable for each song.
When you select a song from a VIMA CD-ROM (VIMA TUNES),
recommended tones will be assigned to the F-110's
[E. Piano], [Strings], and [Others] tone buttons, and these
three tone buttons will blink.
When you press a flashing Tone button, the recommended
tone is then selected, enabling you to perform the selected
song using a tone matched to that song as it plays back.
You can set the F-110 so that the recommended tones are
automatically assigned or not assigned.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Hold down the Track [Others] button and use the
[–] [+] buttons to make the display indicate "rtn."
When you take your finger off the button, the display will
indicate the value of the setting.