Settings For Piano Sounds; Producing Sympathetic Resonance When You Press The Damper Pedal (Damper Resonance); Producing The Resonance Of The Strings When The Keys Are Played (String Resonance); Playing Sounds When The Keys Are Released (Key Off Resonance) - Roland F-110 Owner's Manual

Various Settings

Settings for Piano Sounds

Producing Sympathetic Resonance
When You Press the Damper Pedal
(Damper Resonance)
You can change the volume of the damper pedal resonance.
On an acoustic piano, depressing the damper pedal makes
the notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal
on the F-110 recreates this resonance (Damper Resonance)
when depressed.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Piano] button and use the [–] or
[+] button to select "rES."
3.
Release the [Piano] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
The resonance volume decreases as the
value is lowered, while raising the value
increases the volume of the Damper
OFF, 1–10
Resonance.
The Damper Resonance function is not active
when the value is set to "OFF."
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
54
Producing the Resonance of the
Strings When the Keys Are Played
(String Resonance)
When you play the keys on an acoustic piano, the strings that
are already playing resonate as well. The function that
reproduces this effect is called "String Resonance."
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Piano] button and use the [–] or
[+] button to select "rSt."
3.
Release the [Piano] button to see the current
setting.
4.
Use the [-] [+] buttons to change the setting.
Setting Explanation
The resonance level decreases as the value is
decreased, while increasing the value
OFF, 1–10 increases the amount of resonance.
The String Resonance function is not active
when the value is set to "OFF."
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Playing Sounds When the Keys Are
Released (Key Off Resonance)
You can play the "key off" sound (the subtle sound produced
when the keys are released) obtained when playing an
acoustic piano.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Piano] button and use the [–] or
[+] button to select "rOF."
3.
Release the [Piano] button to see the current
setting.