Settings For Recording - Roland F-110 Owner's Manual

Recording

Settings for recording

1.
Press the [Song] button a number of times until the
indication "USr" (or a number preceded by a "P" or
"U") is displayed.
If the display shows something like "P.01" or "U.01" (or any
other value after the "P" or "U"), press the [–] button until the
following indication appears.
fig.d-USr.eps_88
Alternatively, you can get "USr" to be displayed by
holding down the [Song] button and pressing the [
button.
2.
Press the [ ] button.
The [ ] button will light, the [
will flash, and the F-110 will enter recording standby mode.
If you decide not to record, press the [
3.
Hold down the [
of the tracks you don't want to record, turning off
their illumination.
While you keep holding the [
[Strings] and [Others] buttons flash if the corresponding
tracks are still empty. For tracks that already contain data, the
corresponding buttons light steadily.
You can record to only one track button at a time.
Recording
4.
Press the [ ] button.
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard
(without pressing the [
is not sounded.
When recording begins, the [
button will light.
During the count-in, the count measure is indicated in
the display as "-2" then "-1."
5.
To stop recording, press the [
You can also press the [
38
] button's indicator
] button again.
] button and press the button
] button, the [E. Piano],
] button). In this case, a count
] button and [
] button.
] button to stop recording.
Recording an additional part
6.
If the indication "Usr." is not displayed, press the
[Song] button repeatedly until it appears.
7.
Press the [–] button.
You will return to the beginning of the recorded
performance.
8.
Press the [
9.
Hold down the [
of the track you want to record, making it flash.
]
If you select a previously recorded track, that track will
be overwritten by the newly recorded performance, and
the previously recorded performance will be lost.
The [ ] button will light, the [
and the F-110 will enter recording standby mode.
If you decide not to record, press the [
again.
10.
Press the [
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard
(without pressing the [
is not sounded.
When recording begins, the [
button will light.
During the count-in, the count measure is indicated in
the display as "-2" then "-1."
If you record additional parts without erasing the
previously recorded song, the song tempo and time
signature will remain as it was when the song was first
recorded.
11.
To stop recording, press the [
]
You can also press the [
] button.
] button and press the button
] button will flash,
] button once
] button.
] button). In this case, a count
] button and [
] button.
] button to stop recording.
]