Pedal Settings; Changing How The Damper Pedal Is Applied (Damper Pedal Part); Changing How The Pedals Work (Center/Left Pedal Function) - Roland F-110 Owner's Manual

Pedal Settings

Changing How the Damper Pedal is
Applied (Damper Pedal Part)
When you press the damper pedal during Dual performance
or Split performance, the damper pedal effect is normally
applied to both tones, but you can also select the tone to
which the effect is to be applied.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Press and hold the [Strings] button and use the [–]
or [+] button to select "dPr."
3.
Release the [Strings] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
All enabled
Applied only to Tone 1 (in dual mode)/Right-
hand Tone (in split mode)
Applied only to Tone 2 (in dual mode)/Left-
hand Tone (in split mode)
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Changing How the Pedals Work
(Center/Left Pedal Function)
When you turn on the power, the left pedal functions as the
soft pedal, and the center pedal functions as the sostenuto
pedal (p. 22).
You can change the function of the pedal to a variety of other
operations.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate "Fnc" and you'll be in Function
mode.
2.
Hold down the [Strings] button and use the [–] [+]
buttons to select the pedal whose function you
want to change.
: Center Pedal
: Left Pedal
3.
Release the [Strings] button to see the current
setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
Sets function to sostenuto pedal.
(Selectable only for the center pedal)
Sostenuto
Sets function to soft pedal.
(Selectable only for the left pedal)
Soft
Effects can be switched on/off by pressing
the pedal.
When using the rotary effect, you can control
the speed of rotation.
Effects Switch
* The most appropriate type of effect is
specified for each sound.
The pedal will have the same function as the
[
Play/Stop
Pressing the pedal will layer on Tone 2, used
for Dual performance.
* The Dual function can be applied only
Layer
when using Dual play.
Pressing the pedal will layer on a sound one
octave higher.
* The Octave function cannot be applied
while using Twin Piano, Dual play, or Split
Octave
play.
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
Various Settings
] button.
51