Table of Contents
Advertisement
Changing Settings Related to Song
Playback
You can change a variety of settings related to song playback.
1. Press the [MENU] button, getting the indicator to light .
The EDIT MENU screen appears.
2. Press the Cursor [
] [
press the [ENTER] button to display the EDIT screen .
3. Press the Cursor [
] [
Function," and press the [ENTER] button .
The following screen appears.
4. Press the Cursor [
] [
parameter to be set .
5. Use the [DEC] [INC] buttons to set the value .
If you press the [DEC] button and [INC] button simultaneously, the
setting will return to its default value.
6. When you have finished making the settings, press the
[MENU] button, extinguishing its indicator .
Parameter
Value
ONE SONG
Play Mode
ALL SONG
Transpose
-6–0–+5
Center Cancel
OFF, ON
MIDI OUT Port
ALL, INT, MIDI, USB
Audio Volume
0–127
SMF Volume
0–127
NOTE
For some songs, using Center Cancel might affect the tone quality.
] buttons to select "8 .Utility," and
] buttons to select "0 . Song
] buttons to move the cursor to the
Description
When you play back a song,
only one song will play;
playback will stop at the end of
that song.
The songs in internal memory
or in USB memory will play
consecutively.
This lets you shift the playback
key of a song in semitone steps.
When playing back audio data,
this causes sounds located
in the center (e.g., vocals or
melodic instruments) to be
reduced in volume.
This sets the MIDI connector
(port) from which the song is to
be output.
This sets the volume for audio
file playback.
This sets the volume for SMF
music data playback.
The volume will not change if
Part Mode (p. 62) is set to 16PART.
Selecting the Parts that will Produce Sound
1. Press the [MENU] button, getting the indicator to light .
The EDIT MENU screen appears.
2. Press the Cursor [
] [
press the [ENTER] button to display the EDIT screen .
3. Press the Cursor [
] [
Function," and press the [ENTER] button .
4. Choose "Part Switch," and press the [ENTER] button .
The Part Switch screen will appear.
5. Use the Cursor [
] [
[DEC] [INC] buttons to turn that part on/off .
6. When you have finished making the settings, press the
[MENU] button, extinguishing its indicator .
Parameter
Value
Part Switch
OFF, ON
NOTE
Part-selection functionality is disabled when Part Mode is set to
16PART. No part can be turned off.
Detailed Settings for Each Function
] buttons to select "8 .Utility," and
] buttons to select "0 . Song
] buttons to select a part, and use the
Description
Turns each part on/off for song
playback.
75
Advertisement
Table of Contents
