Types Of Paper And Other Media - Ricoh Aficio SP C400DN Hardware Manual

Hardware guide
Hide thumbs Also See for Aficio SP C400DN:
Table of Contents

Advertisement

Paper and Other Media

Types of Paper and Other Media

Plain Paper
Paper thickness
Printer setup
Printer driver setup
5
Enabled paper feeding tray Any input tray can be used.
Number of sheets that can
be set
Duplex printing
Additional cautions
Letterhead
Printer setup
Printer driver setup
Duplex Printing
Note
❒ If the printing result is badly wet or smudged, change the setting on the
printer's control panel as the following:
• Press the {Menu} key, select [Maintenance], [General Settings], and then select
[Letterhead]. Select one from [Letterhead 1], [Letterhead 2], or [Letterhead 3].
The greater number corresponds to the thicker setting.
The one of these items is normally detected automatically according to the
paper type you set. It is not necessary to change this setting when the print-
ing result has no problem.
82
2
60.2 - 104.7 g/m
(16 - 28 lb.)
• [Plain Paper 1]: 60.2 - 90.2 g/m
• [Plain Paper 2]: 90.2 - 104.7 g/m
Make the following two settings using the control panel:
• Press the {Menu} key, select [Paper Input] , and then select [No
Display (Plain Paper)] for the selected tray's paper type.
• Press the {Menu} key, select [Maintenance], [General Settings],
and then select [Plain Paper Setting]. Select the tray you want to
set, and then select [Plain Paper 1] or [Plain Paper 2].
Select [Plain] or [Plain/Recycled] in the [Paper type:] list.
• Tray 1: 550
• Tray 2, Tray 3 (Paper Feed Unit Type 4000): 550
• Bypass Tray: 100
Make sure paper is not stacked higher than the upper limit mark
(T) inside the tray. Make sure paper is not stacked higher than the
paper guides inside the bypass tray.
Possible
When printing on the reverse side of plain paper that is already
printed on, select [Plain: Dup.Back] from [Paper Type:] using the con-
trol panel or printer driver.
• Press the {Menu} key, select [Paper Input] , and then select [Let-
terhead] for the selected tray's paper type.
Select [Letterhead] in the [Paper type:] list.
Possible
2
(16 - 24 lb.)
2
(24 - 28 lb.)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents