Ricoh Aficio SP C400DN Hardware Manual page 108

Paper and Other Media
E
Press the {Menu} key to return to the initial screen.
Note
❒ To load thick paper, OHP transparencies, or envelopes, make settings for
thick paper, envelope, or OHP transparencies using the control panel and
printer driver.
❒ The number of pages that can be loaded in the bypass tray differs depend-
ing on paper type. Make sure paper is not stacked above the paper guides
inside the bypass tray.
Specifying Custom Size Paper for the Bypass Tray
Important
❒ When loading custom size or special paper, specify the paper size using the
control panel and printer driver.
❒ Paper sizes between 140 - 900 mm in length and 70 - 216 mm in width can be
5
loaded in the bypass tray. However, the printer can be set to print on paper
up to 680 mm in length when using the RPCS printer driver, 677 mm when
using the PS3 printer driver, and 432 mm when using the PCL printer driver.
❒ The custom paper size selected using the printer driver overrides that select-
ed using the control panel. Do not configure settings using the control panel
if you have already made settings using the printer driver. However, when
printing with a printer driver other than the RPCS printer driver, you must
configure the settings using the control panel.
❒ You cannot print on custom size paper with an application that does not sup-
port the custom size setting.
A
Press the {Menu} key.
B
Select [Paper Input] using {T} or {U}, and then press the {OK} key.
102
K C M Y
AQC001S