Clearing Misfeeds - Ricoh Aficio 3260c Operating Instructions Manual

Troubleshooting
x Clearing Misfeeds x
x x
R CAUTION:
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.
Important
❒ When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ If misfeeds occur repeatedly, contact your service representative.
Note
❒ More than one misfeed location may be indicated. In such a case, check every
applicable area. See the following charts:
5
• B, C, D, E, F ⇒ p.118
• A, P, Q, U ⇒ p.120
• R(Finisher 3000B)⇒ p.122
• R(Finisher MEC) ⇒ p.123
• R(Finisher MEC BK), W ⇒ p.124
❒ You can find a sticker explaining how to remove misfed paper inside the front
cover or finisher.
❒ If detailed procedure appears on the right of the screen, refer to it when re-
moving the sheet.
A After each step, press [Next]. To check the previous step again, press [Previous].
B After completing the last step, open the machine's front cover, and then fol-
low the instructions on the back of the cover.
C Close the front cover.
116