Display Power - Raymarine E90W User Reference Handbook

Device Type Suitable Devices
GPS — external Raystar125 GPS or
third-party external GPS
receiver
Instruments All current Raymarine
instruments
Autopilot — Raymarine All current Raymarine
autopilots
Autopilot — third party Third-party autopilots
VHF radio Raymarine DSC VHF
radios
Additional Multifunction E90W, E120W, E140W,
Display(s)
Video/camera Composite PAL or NTSC
video source
20

3.2 Display power

Connectivity
SeaTalk, SeaTalk ng , or
Powering the display on
NMEA 0183
1. Press and hold the POWER button until the Raymarine logo
ng
SeaTalk, SeaTalk , or
2. Press OK to acknowledge the warning window.
NMEA 0183
SeaTalk, SeaTalk ng
Powering the display off
1. Press and hold the POWER button until the countdown reaches
NMEA 0183 (waypoint
and bearing information)
NMEA 0183, SeaTalk
Note: If the POWER button is released before the countdown
reaches zero, the power off is cancelled.
SeaTalk, SeaTalk hs ,
SeaTalk ng
BNC connector
appears.
zero.
E-Series Widescreen User reference