Data Master - Raymarine E90W User Reference Handbook

Aligning the touchscreen
1. Press the MENU button.
2. Select Display Setup.
3. Select Touchscreen Alignment.
4. Place your finger over the on-screen object momentarily, then
remove it.
The on-screen object moves.
5. Place your finger over the on-screen object momentarily, then
remove it.
6. If the operation was successful, an "Alignment Completed"
message is displayed. Press the HOME button to return to the
home screen.
7. If the operation was unsuccessful, an "Alignment Failed"
message is displayed, and the Display Setup Menu is shown.
Repeat steps 3 to 5.
38

Data master

Any system containing more than one networked multifunction
display must have a designated data master.
The data master is the display which serves as a primary source
of data for all displays, it also handles all external sources of
information. For example the displays may require heading
information from the autopilot and GPS systems, usually received
through a SeaTalk ng or NMEA connection. The data master is the
display to which the SeaTalk, NMEA and any other data connections
are made, it then bridges the data to the SeaTalk
any compatible repeat displays. Information shared by the data
master includes:
• Cartography
• Routes and waypoints
• Radar
• Sonar
• Data received from the autopilot, instruments, the engine and
other external sources.
Your system may be wired for redundancy with data connections
made to repeat displays. However these connections will only
become active in the event of a fault and/or reassignment of the
data master.
Designating the data master
The following task must be performed on the multifunction display
that you want to designate as the data master:
1. Press the MENU button.
2. Select the System Setup menu item.
3. Select the System Integration menu item.
4. Select the Data Master > ON option.
5. Press the OK button.
hs network and
E-Series Widescreen User reference