Erasing A Route - Raymarine E90W User Reference Handbook

In the event that you steer off-track, you can go straight to your
target by resetting XTE.
Resetting Cross Track Error (XTE)
While following a route in the chart application:
1. Press the RESTART XTE softkey.
Resetting XTE results in a new course from the current vessel
position to the current target waypoint. This does not affect your
saved route.

Erasing a route

In the chart application:
1. Select the PLANNING softkey.
2. Select the MY ROUTES softkey.
3. Highlight the required route from the list.
4. Select the ERASE ROUTE softkey.
5. Select YES to confirm the action, or NO to cancel.
Using waypoints, routes and tracks
Note: You can delete any route, except for the one that you are
currently following. When you erase a route, only those waypoints
associated with that route are deleted.
Review or edit a route
There are a variety of attributes associated with routes. These can
be reviewed and edited.
You can:
• Show or hide a route on the chart screen.
• Review details of the route
• Add and remove waypoints.
• Move waypoints within a route.
• Reverse a route.
• Change the name or color of a route.
• Erase a route.
• Show or hide a route on the chart screen.
• Adjust the line thickness for routes.
Note: An active route can be edited, with the exception of the
target waypoint. If a waypoint being edited becomes the target,
then the system shall cancel the edit; the waypoint shall remain in
its original position.
Selecting a route to review or edit
1. Do one of the following to select the required route:
• With the chart application active, select a route on screen,
then press the Review & Edit This Route softkey.
63