Raymarine E90W User Reference Handbook page 58

• Archive or transfer any waypoints.
• Enter the Waypoint Password Setup menu.
Note: Once you have provided a password to the system, it must
be entered to access the Password Setup sub-menu, regardless
of the whether Password Protection is set to ON or OFF.
Note: Raymarine strongly recommends that you backup your
waypoint data BEFORE password protecting your waypoints.
This is so that, in the event that you forget your password, you
can easily restore your waypoints.
Disabled Data/Functions
When Password Protection is ON and you have not entered a
password, you will NOT be able to:
• View details of waypoint and route databases.
• Edit waypoints or routes.
• Goto an existing waypoint.
• Follow a route.
• View waypoints on screen (even when the SHOW/HIDE status
is set to SHOW).
• View waypoint names on screen (even when WAYPOINT NAME
is set to ON).
All other options including GOTO CURSOR are unaffected.
Specifying a password for waypoints
1. Press the MENU button.
2. Select the System Setup menu item.
3. Select the Waypoint Password Setup menu item.
4. Select the ON option for the Enable Password menu item.
5. Press the OK button.
58
6. Read the displayed warning, and press the YES softkey to
accept it, as appropriate.
7. Enter the password (1 to 16 characters, and case sensitive).
8. Press the OK button.
9. Repeat Steps 7 to 8 to confirm the password.
10. Add a hint to help you remember the password (optional).
11. Press the OK button.
The password is now set and protection enabled, although access
to the waypoint and route functions remains available until you
restart your multifunction display.
Changing the waypoints password
1. Press the MENU button.
2. Select the System Setup menu item.
3. Select the Waypoint Password Setup menu item.
4. Select the Change Password menu item.
5. Enter your new waypoints password (1 to 16 characters, and
case sensitive).
6. Press the OK button.
7. Repeat Steps 5 to 6 to confirm the password.
8. Enter a hint to help you remember the password (optional).
9. Press the OK button.
Disabling password protection for waypoints
1. Press the MENU button.
2. Select the System Setup menu item.
3. Select the Waypoint Password Setup menu item.
4. When prompted, enter your existing waypoints password.
5. Press the OK button.
6. Select the OFF option for the Enable Password menu item
7. Press the OK button.
E-Series Widescreen User reference