Speaker Setting - Pioneer VSX-33TX Operating Instructions Manual

SURROUND SETUP MENU

Speaker Setting

Starting from this procedure use the SURROUND SETUP menu. To access the menu follow steps 1-3 on p.27
and in step three choose SURROUND SETUP (Surround Set is shown on the receiver's display). The steps
below show you how to specify the type of speakers you connected. Use the 5¥∞ buttons (or the MULTI JOG
dial) to make a selection from the display, and use the ENTER button to register the information.
SOURCE RECEIVER
VCR VCR
DVD TV
1
MULTI CONTROL
CD CD-R TUN TVC
1 2 3
LOUDNESS VIDEO SELECT MULTI CH INPUT
4 5 6
INPUT ATT DIGITAL NR FL DIMMER
7 8 9
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
+10
0
ENTER
EFFECT/CH SEL
RECEIVER
TV VOL TV MASTER VOLUME
TV CONTROL
TVFUNC
4 ¢
CHANNEL
TUNE
1-4
ST ST
ENTER
TUNE
GUIDE MENU
D.ACCESS BAND CLASS
& ‹ *
MPX DTV ON / OFF DTV MENU
¶ ! ⁄
RETURN S.MODE CLEAR DTV INFO
RDM
RECEIVER DIRECT CONTROL
MIDNIGHT DSP STEREO FUNCTION
ADVANCED STANDARD MUTE
THX
2
/ DTS
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
RETURN
MULTI JOG
(Turn to select / Push to enter)
1 Select "Speaker Set" from the SURROUND
SETUP MENU with the 5¥∞ buttons or
2
MULTI JOG dial (if continuing from the last
set up, it should already be selected).then
press the ENTER button.
See "Setting Up for Surround Sound" on the page 27 if you are
DISC
unsure how to do this.
2 "Speaker Set" will appear in the display,
press ENTER again to move to the settings.
3 Select either the FREE or THX speaker
setting mode with the 5¥∞ buttons (or
MULTI JOG dial) then press ENTER.
To specify each speaker individually select FREE.
Î
If you connected a complete set of THX speakers select THX
and skip step 5.
4 Specify the type of speakers you connected.
See the explanations below for the meaning
of each size.
1 Pess ENTER. Use the 5 or ∞ buttons(or MULTI JOG dial) to
move the cursor to the speaker you want to adjust.
2 Press ENTER to select that speaker. The speaker name will
flash in the receiver's display.
3 Press 5 or ∞ to move the setting to LARGE, SMALL, or NO
depending on the size of your speakers (You can't select NO
for the FRONT speakers. See below for detailed explana-
tions).
4 Press ENTER.
5 Repeat 2 and 4 for each speaker.
(see next page for explanations of sizes)
Initial Setup
31