Pioneer VSX-33TX Operating Instructions Manual page 28

Initial Setup
DVD
5
REMOTE SETUP
+10
(to exit
EFFECT/CH SEL
SYSTEM
SETUP)
28
SOURCE RECEIVER
VCR VCR
TV
1 2
MULTI CONTROL
CD CD-R TUN TVC
1 2 3
LOUDNESS VIDEO SELECT MULTI CH INPUT
4 5 6
INPUT ATT DIGITAL NR FL DIMMER
7 8 9
SYSTEM SETUP SIGNAL SELECT
DISC
0
ENTER
RECEIVER
ASSIGN SETUP:
Digital In Select (See p.29)
In order to use your digital components you must match the
numbered digital input settings with the numbered digital jacks
used by your digital components.
Multi Channel In Setting (See p.30)
This is for hooking up a multi channel external decoder that
may give you higher quality when decoding discs. This feature
lets you select adjustable to non-adjustable sound.
SURROUND SETUP:
Speaker Setting (See p.31-32)
Use to specify the type and number of speakers you connected.
Channel Delay (See p.33)
Adding a slight delay to some speakers enhances sound
separation and is particularly important for achieving a surround
sound effect. You need to figure out the distance from your
listening position to your speakers to add the proper delay.
Channel Level (See p.34-35)
Use to balance the volumes of your different speakers.
Crossover Network (See p.36)
This feature lets you select which bass frequencies will be sent
to the subwoofer or front speakers.
Bass Level (See p.37)
Dolby Digital and DTS audio sources include ultra-low bass
tones. Set the bass peak level as needed to prevent the ultra-
low bass tones from distorting the sound from the speakers.
D-Range Control (See p.38)
This feature makes possible excellent surround sound effects
when listening to Dolby Digital sources at low volumes.
FUNCTION RENAME
This feature lets you rename specific "functions," which in this
case stands for components like DVD/LD, VCR 1, etc. This is a
useful feature for matching the remote control and receiver
display exactly with your home setup.
5 Go on to the next page to start the set up. If
you don't want to make any settings go can
exit this setup. To exit the SYSTEM SETUP
MENU press the SYSTEM SETUP (or SETUP
on the front panel) button again.