Multi Channel In Playback; 96 Khz 24 Bit Performance - Pioneer VSX-33TX Operating Instructions Manual

Basic Playback

MULTI CHANNEL IN Playback

MULTI CH IN allows you to connect an external decoder to enjoy certain types of specialized discs. To use
MULTI CH playback follow the instructions below.
SOURCE RECEIVER
DVD TV
MULTI CONTROL
CD CD-R
1 2
LOUDNESS VIDEO SELECT
4 5
INPUT ATT DIGITAL NR
7 8
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
+10
0
EFFECT/CH SEL
1
RECEIVER
TV VOL TV
TV CONTROL
TVFUNC
4
CHANNEL
TUNE
ST
ENTER
TUNE
GUIDE
D.ACCESS BAND
& ‹
MPX DTV ON / OFF
¶ !
RETURN S.MODE CLEAR DTV INFO
RECEIVER DIRECT CONTROL
MIDNIGHT DSP STEREO
ADVANCED STANDARD MUTE
THX
2
/ DTS
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT

96 kHz 24 bit Performance

This receiver is capable of playing back advanced DVD discs which are recorded in 96 kHz/24 bit format (these
are all stereo discs) and any source recorded in 96 kHz and up to 24 bit. The receiver will automatically read the
format of the source and play accordingly (of course the SIGNAL SELECT will have to set to AUTO or DIGITAL
to read the DVD soundtrack). When the receiver plays a 96 kHz disc "96 kHz" and whatever mode you're using
(for example "STEREO," "DIRECT" ) will appear in the display.
48
VCR VCR
1 2
TUN TVC
2
3
MULTI CH INPUT
6
FL DIMMER
9
DISC
ENTER
MASTER VOLUME
¢
ST
MENU
CLASS
*
DTV MENU
⁄
FUNCTION
Î
1 Press RECEIVER.
This switches the remote to the receiver control mode.
2 Press the MULTI CH INPUT button on the
remote control or the front panel.
Each press switches the input between the previous mode and
MULTI CH IN.
When MULTI CH IN is selected only the volume level can be
memo
set. All of this unit's other features (DIGITAL NR, etc.) cannot
be used. Also, all speaker settings and other setup settings
have no effect.
2
• When a 96 kHz/24 bit disc is played back the volume
memo
may be louder than that of a normal disc.
• Some DVD players cannot play 96 kHz/24 bit discs.
Check the manual of your DVD player to make sure.
• During this playback the player enters the STEREO
mode and you can use the controls available in
STEREO mode (LOUDNESS, MIDNIGHT, TONE
controls, etc., see p.46-47).
• With 96 kHz/24 bit discs you are able to use MULTI
CH IN playback and the TAPE 2 MONITOR.
• In 96 kHz/24 bit mode you can't use the STANDARD,
ADVANCED THEATER, THX, or DSP modes.