Using The Tuner; Automatic And Manual Tuning - Pioneer VSX-33TX Operating Instructions Manual

Using the Tuner

Automatic and Manual Tuning

The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the exact frequency of the station you desire, see "Direct
Access Tuning" on the following page.
SOURCE RECEIVER
VCR VCR
DVD TV
1 2
MULTI CONTROL
CD CD-R TUN TVC
1 2 3
LOUDNESS VIDEO SELECT MULTI CH INPUT
4 5 6
INPUT ATT DIGITAL NR FL DIMMER
7 8 9
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
+10 DISC
0
ENTER
EFFECT/CH SEL
RECEIVER
TV
TV VOL MASTER VOLUME
TV CONTROL
TVFUNC
4 ¢
CHANNEL
TUNE
ST ST
ENTER
TUNE
GUIDE MENU
D.ACCESS BAND CLASS
& ‹ *
MPX DTV ON / OFF DTV MENU
MPX ¶ ! ⁄
RETURN S.MODE CLEAR DTV INFO
RDM
RECEIVER DIRECT CONTROL
MIDNIGHT DSP STEREO FUNCTION
THX ADVANCED STANDARD MUTE
2
Î
/ DTS
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
2 3
MPX
1 Press the TUN button
On the receiver, select "TUNER" with the multi jog.
1
2 Press BAND button on the remote or the
front panel to select the band (FM or AM).
4
Each press switches the band: FM j AM
3
3 Tune in the station.
2
For Automatic Tuning
Press and hold TUNING –/+ buttons for about one second, then
release.
The tuner starts searching the selected band and stop automat-
ically at the first station it locates. Repeat to locate other
stations.
For Manual Tuning
• To change frequencies one step at a time, press TUNING –/+
repeatedly.
• To change frequencies quickly, hold down TUNING –/+ and
release when you reach the frequency you desire.
1
4 Adjust the MASTER VOLUME buttons on
the remote control or the MASTER VOLUME
on the front panel.
MPX Mode
4
If the TUNED or STEREO indicators do not light when tuning an FM
station, because the station is too far away or the broadcast signal is
weak, press MPX on the remote control or front panel to switch to
MONO reception. This should improve reception enough for you to
enjoy the broadcast.
51