Recording - Panasonic Diga DMR-EZ47 Operating Instructions Manual

Recording

Can I record from a
commercially purchased video
cassette or DVD?
Can DVD-R, DVD-R DL,
DVD-RW (DVD-Video format),
+R, +R DL, and +RW recorded
on the unit be played on other
equipment?
Can I record digital audio signals
using the unit?
Can a digital audio signal from
the unit be recorded to other
equipment?
Can I switch to SAP during
recording?
 Most commercially sold video cassettes and DVDs are copy
protected; therefore, recording is usually not possible.
 You can play these discs on compatible equipment such as DVD
players after finalizing the disc on this unit.
 [+RW] It is not necessary to finalize. To enable play on other
DVD players, please use "Create DVD Top Menu" in the DVD
Management menu.
 In any case, ability to play a disc depends on the condition of the
recording, the quality of the disc, and the capability and format
constraints of the DVD player.
 You cannot record digital signals. The digital audio terminals on the
unit are for output only. (The audio recorded from a digital video
camcorder using the DV camcorder recording function, however, is
recorded digitally.)
 You can record if using the PCM signal. When recording DVD,
change the "Digital Audio Output" settings to the following via the
Setup menu:
– PCM Down Conversion: "On"
– Dolby Digital: "PCM"
– DTS: "PCM"
However, only
– As long as digital recording from the disc is permitted.
– As long as the recording equipment is compatible with 48 kHz
sampling frequency.
 You cannot record MP3 signals.
 With DVD-RAM and a video cassette, you can, and the audio
recorded also changes. Press [AUDIO] to change to SAP.
 You cannot change the audio type when recording an analog
multilingual broadcast on a DVD-R, DVD-R DL, DVD-RW (DVD-
Video format), +R, +R DL or +RW disc. Establish the appropriate
setting before recording with "Multi-channel TV Sound (Analog)" in
the Setup menu.
 Only one language channel is recorded from digital multilingual
broadcasts, so you will be unable to change languages during
recording. Set the language in "Audio Language Setting" in the
Setup menus.
Page
−
46
47
−
−
50
−
13, 15
13, 50
13, 15,
48
89
RQT8853