Advanced Features - Panasonic KX-FPG391 Operating Instructions Manual

8. Programmable Features
Code #17: Setting the ringer tone for outside
calls
RINGER TONE
=TONE 1 [±]
To set the base unit ringer tone from one of 7
patterns for outside calls. You can select "TONE
1" (default), "TONE 2", "TONE 3", "MELODY
1", "MELODY 2", "MELODY 3" or "MELODY 4".
Note:
L You can also program this feature with the
handset (page 83).
L To set the handset ringer tone, see page 83.
L If you have downloaded ringer melodies
using the openLCR service, they can also be
selected. See page 109 for details.
76

8.3 Advanced features

Code #21: Activating the Talking Caller ID
feature
TALK CALLER ID
MODE=ON [±]
"ON" (default): Caller names will be announced
from the speakerphone.
"OFF": Deactivates this feature.
Note:
L If the ringer volume is OFF, caller names will
not be announced.
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON [±]
"ON" (default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 54).
"OFF": The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
MODE=ERROR [±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
"NEXT FAX": This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
"ERROR" (default): When the previous fax
transmission fails and you wish to re-send the
document.
"OFF": Deactivates this feature.
Note:
L This feature is not available for broadcast
transmission.
L Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
MODE=OFF [±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.