Editing A Stored Item - Panasonic KX-FPG391 Operating Instructions Manual

3. Telephone
Note:
L If you have rotary or pulse service, you need
to press {*} before pressing {MENU} in
step 1 to change the dialing mode
temporarily to tone.
L To prevent misdialing, we recommend you
add pauses where needed when storing
numbers. For example, add pauses after a
telephone number when storing in the phone
book (page 38) if a PIN number is to be dialed
after it.
3.4.2 With the base unit
1
Press {>}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {SP-PHONE}.
L The unit will start dialing automatically.
To search for a name by initial
Example: "LISA"
1. Press {>}.
2. Press {A} or {B} to initiate the phone book.
3. Press {5} repeatedly to display any name
with the initial "L" (see the character table,
page 38).
L To search for symbols (not letters or
numbers), press {1}.
4. Press {B} repeatedly to display "LISA".
L To stop the search, press {STOP}.
L To dial the displayed number, press {SP-
PHONE}.
40

3.5 Editing a stored item

L Keep the front cover page open for button
locations.
3.5.1 With the handset
Make sure the handset is not being used.
1
Press the soft key ({C}).
2
Press {v} or {e} repeatedly to display the
desired item.
3
Press the soft key ({EDIT}).
L If you do not need to edit the name, skip
to step 5.
4
Edit the name. For further details, see the
storing procedure on page 38.
5
Press {v}.
L If you do not need to edit the telephone
number, skip to step 7.
6
Edit the telephone number. For further
details, see the storing procedure on page
38.
7
Press {v}.
8
Press the soft key ({SAVE}).
9
Press {OFF}.
3.5.2 With the base unit
1
Press {>}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {MENU}.
4
Press {*}.
L If you do not need to edit the name, skip
to step 6.
5
Edit the name. For further details, see the
storing procedure on page 39.
6
Press {SET}.
L If you do not need to edit the telephone
number, skip to step 8.
7
Edit the telephone number. For further
details, see the storing procedure on page
39.
8
Press {SET}.