Battery Installation; Battery Replacement - Panasonic KX-FPG391 Operating Instructions Manual

1. Introduction and Installation

1.9 Battery installation

1
Insert the battery (1), and press it down until
it snaps into the compartment.
2
Close the battery cover.
18
1
For Fax Advantage assistance, call 1-800-435-7329.

1.10 Battery replacement

If battery performance diminishes, make sure
you have cleaned the charge contacts and fully
charged the battery. After recharging if
"Recharge battery" is displayed and/or
0688754 continues to flash, or "Charge for 6
HRS" and 68885 are displayed, the battery
needs to be replaced.
Please use only Panasonic batteries. See
page 10 for accessory information.
L Only use rechargeable batteries. If you
install non-rechargeable batteries and
start charging them, the batteries may
leak electrolyte.
1
Press the notch on the battery cover firmly,
and slide the cover.
2
Replace the old battery with a new one, and
close the cover (see the battery installation
procedure on page 18).
Attention:
A nickel metal hydride battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for information on
how to recycle this battery.