Table of Contents
Advertisement
Advanced
features!
How to set menu options
MENU
1. Press
.
2. Rotate
EASY DIAL
MODE" is displayed.
Press
and rotate
SET
the desired feature is displayed.
Programming table
Code
Display & Feature
AUTO JOURNAL
#22
To print the journal report
automatically for fax communications
OVERSEAS MODE
If you have difficulty sending an
overseas fax, activate this feature
#23
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
DELAYED SEND
To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
#25
your telephone company.
The setting can be reserved to
take place up to 24 hours in
advance.
For KX-FP185 only
AUTO CALL. LIST
#26
To print Caller ID list automatically
SILENT FAX RING
#30
To change the number of rings
when the unit detects a voice call in
the TEL/FAX mode
until "ADVANCED
until
EASY DIAL
ON
OFF
ON
OFF
ON /
fax no. /
hh:mm
OFF
ON
OFF
3, 4, 5, 6, 7,
8, 9
(The default setting is in bold type.)
Features Summary
3. Press
SET
.
4. Rotate
EASY DIAL
setting is displayed.
5. Press
.
SET
MENU
6. Press
.
Note:
Step 4 may be slightly different depending on the
feature.
See page 64 for more details.
Settings
How the unit operates
"ON": The unit will print the journal
report automatically after every 30
new fax communications (p. 32).
After transmission, the unit will turn
off automatically.
This feature is not available for
broadcast transmission.
The calling charge may be higher.
To send a document:
1. Insert the document.
2. Follow steps 1–3 above.
3. Rotate
4. Press
5. Enter the fax number.
6. Press
7. Enter the transmission start time.
8. Press
9. Press
To cancel after programming,
press
"ON": The unit will print the Caller
ID list automatically after every 30
new calls (p. 26).
See pages 44 and 45 for details.
until the desired
to select "ON".
EASY DIAL
.
SET
.
SET
.
SET
.
MENU
then
.
STOP
SET
(continued)
67
Advertisement
Table of Contents
