Your Logo - Panasonic KX-FPG391 Operating Instructions Manual

2. Preparation
Example: August 10, 2004
Press {0}{8} {1}{0} {0}{4}.
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select "AM" or
"PM".
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
2. Press {*} repeatedly to display "PM".
6
Press {SET}.
L The next feature will be displayed.
L If 3 beeps sound, the setting is not
correct. Start again from step 4.
7
Press {MENU} to exit.
Note:
L The other party's fax machine will print the
date and time on the top of each page you
send according to your unit's date and time
setting.
L The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
If you have subscribed to a Caller ID
service
The date and time will be automatically set
according to the received caller information.
L If the time has not previously been set, Caller
ID will not adjust the clock.
If you have registered with openLCR
service
The date and time will be automatically set.
32
M:08/D:10/Y:04
TIME: 1 2:00AM
|
M:| 0 8/D:10/Y:04
TIME: 10:15AM
M:| 0 8/D:10/Y:04
TIME: 10:15PM
For Fax Advantage assistance, call 1-800-435-7329.

2.13 Your logo

The logo can be your name or the name of your
company.
{STOP} {MENU}
{SET} {<}{>}{A}{B}
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display the
following.
3
Press {SET}.
L The cursor (|) will appear on the display.
4
Enter your logo, up to 30 characters. See the
following character table for details.
5
Press {SET}.
L The next feature will be displayed.
6
Press {MENU} to exit.
Note:
L Your logo will be printed on the top of each
page sent from your unit.
To select characters with the dial keypad
Keypad Characters
# & '
{1}
/ 1
a b c
{2}
d e f
{3}
g h i
{4}
j k l
{5}
SYSTEM SETUP
PRESS NAVI.[( )]
YOUR LOGO
PRESS SET
LOGO=|
( ) , – .
@
A B C 2
D E F 3
G H I 4
J K L 5