Panasonic KX-FPG391 Operating Instructions Manual page 79

To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 53).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {A} or {B} repeatedly to select "ON".
6. Press {SET}.
7. Enter the fax number.
8. Press {SET}.
9. Enter the transmission start time.
L Press {*} repeatedly to select "AM" or
"PM".
10. Press {SET}.
11. Press {MENU}.
Note:
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
MODE=OFF [±]
"ON": The Caller ID list will be printed
automatically each time the base unit logs 30
different callers (page 43).
"OFF" (default): The Caller ID list will not be
printed, but the unit will keep a record of the
information for the last 30 different callers.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
MODE=OFF [±]
See page 61 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D [±]
See page 62 for details.
Code #34: Setting the quick scan
QUICK SCAN
MODE=OFF [±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
8. Programmable Features
"ON": The unit will scan the document and store
it into memory first, then the unit will start
sending or copying.
"OFF" (default): Deactivates this feature.
Note:
L If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
canceled and this feature will be turned OFF
automatically.
Code #36: Receiving oversized documents
RCV REDUCTION
MODE=92% [±]
If the size of the document sent by the other
party is as large as or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
Setting Recording
paper size
"100%" Legal
A4
"92%" Letter
(default)
Legal
A4
"86%" Letter
"72%" Letter
A4
Code #39: Changing the base unit display
contrast
LCD CONTRAST
MODE=NORMAL [±]
"NORMAL" (default): For normal contrast.
"DARKER": Used when the display contrast is too
light.
Note:
L To change the handset display contrast, see
page 86.
Code #41: Changing the fax activation code
FAX ACTIVATION
MODE=ON [±]
If you wish to use a handset (page 57) or an
extension telephone (page 57) to receive faxes,
Original
document
size
Letter, A4
Letter
Letter
Legal
A4
A4
Legal
Legal
77