Palm Tungsten T2 Handbook page 431

To create a login script:
Tap Script.
1.
Tap the End pick list.
2.
Select the command you want from the Command list. If the command requires
3.
additional information, a field appears to the right of it for you to enter the
information. The following commands are available:
Tells your handheld to wait for specific characters from the
Wait For
TCP/IP server before executing the next command.
Detects a challenge-response prompt coming from the server
Wait For Prompt
and then displays the dynamically generated challenge
value. You then enter the challenge value into your token
card, which in turn generates a response value for you to
enter on your handheld. This command takes two
arguments, separated by a vertical bar (|) on the input line.
Transmits specific characters to the TCP/IP server to which
Send
you are connecting.
Transmits a carriage return or line feed (LF) character to the
Send CR
TCP/IP server to which you are connecting.
Transmits the user ID information entered in the User ID field
Send User ID
of the Network Preferences screen.
Transmits the password entered in the Password field of the
Send Password
Network Preferences screen. If you did not enter a password,
this command prompts you to enter one. The Password
command is usually followed by a Send CR command.
Tells your handheld to wait a specific number of seconds
Delay
before executing the next command in the login script.
Reads an IP address and uses it as the IP address for your
Get IP
handheld. This command is used with SLIP connections.
Tap here
Setting Communication Preferences
417