Palm Tungsten T2 Handbook page 382

Chapter 21 Performing HotSync
Tap the pick list below the icon and select a modem configuration.
4.
If you need to create a configuration, tap the Menu icon
Connection Setup on the Options menu. See
Chapter 22
Tap the Enter phone # field.
5.
If you plan to connect to your company's dial-in server (network modem)
instead of connecting to a computer modem, see
HotSync operations"
Enter the telephone number to access the modem connected to your computer.
6.
If necessary, enter a dial prefix (such as "9") to access an outside line, and then
7.
tap the Dial Prefix check box.
TIP
sequence. Each comma equals a two-second pause.
If the phone line you're using for the handheld has Call Waiting, select the
8.
Disable call waiting check box to avoid an interruption during the modem
HotSync operation.
If you want to use a calling card to place the call, select the check box and enter
9.
the calling card number.
Tap OK.
10.
368
®
Operations
for more information.
later in this chapter.
You can enter a comma in the field to introduce a "pause" in the dialing
Select a modem
configuration
"Connection Preferences"
Tap here
, and then select
"Conducting network
in