Palm Tungsten T2 Handbook page 208

Chapter 17 Using Palm™ VersaMail™ Personal E-mail Software
POP accounts
Tap Next.
2.
Setting outgoing mail options
Outgoing mail options are the same for POP and IMAP accounts.
To set outgoing mail options:
(Optional) Enter or select any of the following:
1.
Display Name
Reply To
Address
BCC
Tap Next.
2.
194
IMAP accounts
Enter the name you want to appear on your outgoing messages,
such as "Joe Smith."
Enter the e-mail address that you want recipients to see and
reply to on your e-mail messages, only if this is different from the
e-mail address from which you are sending the message. For
example, if you are sending a message from "me@yahoo.com"
but you want recipients to reply to "me@earthlink.net," enter the
reply-to address here. Reply To Address makes it look as though
the e-mail came from the address you entered.
Select the BCC check box to send a blind copy of any e-mail
message you send to another e-mail address. The blind copy
e-mail address is not seen by the other recipients of the message.
For example, if you want a copy of all messages you send from
your handheld to be sent to your corporate e-mail account, enter
that e-mail address.