Palm Tungsten T2 Handbook page 425

To configure Internet access with a Bluetooth phone or LAN access point:
From the Communications Preferences list, select Network.
1.
Tap the Service pick list and select the name of your ISP or network service. See
2.
"To select a network service profile:"
If the name of your service does not appear on the list, see
information to a network service profile"
adding an item to the Service pick list.
Enter your User Name and Password for your ISP or network service. See
3.
"Entering a user name"
details.
Tap the Connection pick list and select a connection to a Bluetooth GSM phone,
4.
a high-speed wireless data network, or a LAN access points for which you have
already created a trusted pair. The Connection name is based on the model of
your phone (if you used Phone Link to create the connection) or the name you
assigned to the high-speed wireless data network or LAN access point
connection when you created it.
If you selected a Bluetooth phone connection in step 4, tap Phone and enter the
5.
dial-up connection number for your ISP, and then tap OK. See
telephone settings"
If you are using a Bluetooth Phone or LAN access point, you can now connect and
disconnect as described earlier in this chapter. If you are using a high-speed
wireless data network connection, you must send an initialization (INIT) string as
described in the following procedure.
earlier in this chapter for details.
and "Entering a password"
Enter the user name and password
you use to connect with your ISP
earlier in this chapter for details.
Setting Communication Preferences
"Adding detailed
later in this chapter for information on
earlier in this chapter for
"Adding
411