Selecting The Video Signal Type (Video Out) - Olympus IR-500 Reference Manual

Selecting the video signal type (VIDEO OUT)

Selecting the video signal type (VIDEO
OUT)
Select NTSC or PAL according to your TV video signal type. When you use the camera with a
TV overseas, set the correct video signal type in accordance with the local system before
connecting to the TV. If an incorrect video signal type is set, the output images will not appear
properly.
Tip
When you use the camera with a TV overseas, check the video signal of the local system before connecting to
the TV.
NTSC: North America, Japan, Taiwan, Korea
PAL: European countries, China
1
Turn the mode dial to q.
The setup menu appears.
2
Press a/c to select "VIDEO OUT."
Press d to enter the video signal type setting.
VIDEO OUT
MODE RESET
3
Press a/c to select "NTSC" or "PAL."
4
Press 9.
The video signal type is set and the screen returns to the setup menu.
170
NTSC
PAL
Mode dial
QU IC K
VI EW
abcd buttons
O K
OP EN
OP EN
9 button