Setting Serial Numbers For File Names (File Name) - Olympus IR-500 Reference Manual

Setting serial numbers for file names (FILE NAME)

2
Press a/c to select "REC VIEW."
Press d to enter the Rec View settings.
ERASE STORED IMAGE
SHUTTER SOUND
BEEP
REC VIEW
3
Press a/c to select "ON" or "OFF," then press 9.
Rec View is enabled or disabled and the screen returns to the setup menu.
Setting serial numbers for file names (FILE
NAME)
There are two file naming methods, "RESET" or "AUTO." The default setting is "RESET." To
set serial numbers for file names, select "AUTO."
A file name and folder name (for the folder containing the file) are created automatically for each
recorded image. File and folder names are assigned as shown below, using a file number (0001–
9999) and folder number (100–999), respectively.
• Months January through September are expressed by the numbers 1 through 9,
October by the letter A, November by B, and December by C.
164
OFF
ON
Folder name
\DCIM\***OLYMP\Pmdd****.JPG
Month (1–C)
Folder number Day (01–31)
(100–999)
File name
File number (0001–9999)