Olympus IR-500 Reference Manual page 118

Editing still pictures (EDIT)
3
Press p to display the playback menu, then press a/c to select
"R."
Press d to enter the recording sound settings.
INFO
4
Press 9.
Sound recording begins. When recording ends, the screen returns to the playback menu.
Press p to return to playback mode.
Recording sound
Notes
• Sound cannot be recorded to protected pictures. Cancel the protection setting before recording sound. For
details, see "Protecting pictures (0)" (g page 126).
• Sound cannot be recorded to pictures which have been recorded to an album.
• Sound cannot be recorded when there is insufficient card storage capacity.
• Sound cannot be recorded to pictures saved as "read-only" using a computer. You must cancel "read-only"
using your computer.
• If the source of the sound you are recording is more than 1 m (3.3 ft.) from the microphone, the recorded
sound may not be very clear.
• When buttons are operated during sound recording, button operation sounds may be recorded.
• You cannot erase recorded sounds. If you want to erase sound of a picture, re-record the sound of the
picture in a quiet place.
118
START
"H" appears when a
100 00 - 0009
0009 4M 4M
picture with sound is played
back.
'04.12.03.14:03 '04. 12.03.14:03
9