Multitech FaxFinder FF-120 Administrator User Manual page 72

"Modem Configuration: POTS Modem" Screen Field Definitions (cont'd)
Field Name
Error Correction
Smart Dial
Fax Direction
Multi-Tech Systems, Inc.
Values Description
on, off By setting Error Correction to "on," you are
requesting that faxes be sent in an error-free
condition, which can be achieved only if the
remote fax machine with which you are
communicating also supports Error Correction
and has this feature enabled. The Error
Correction feature slows down fax transmissions.
If you are operating at speeds below 16,800 bps,
you can set Error Correction "off" to achieve
faster transmissions of faxes, although the
quality of the fax transmissions may be
compromised. However, if you have set the fax
baud rate to 16,800 bps or higher, then error
correction is automatically enabled.
Default = on.
on, off If set to "on," the POTS modem will detect dial
tones and busy signals. If 'no dial tone'
messages appear consistently, the Smart Dial
feature may be having difficulty detecting PBX
dial tone. In such cases, set Smart Dial to "off."
Default = on.
both, inbound, In this field, you can set the FaxFinder to allow
outbound, only incoming faxes, only outgoing faxes, or to
allow both.
FF-120/220/420/820 FaxFinder Fax Server Admin User Guide
Chapter 4: FaxFinder Server Software Screens
72