Multitech FaxFinder FF-120 Administrator User Manual page 48
1/2-port and 4/8-port v.34 fax servers
Hide thumbs
Also See for FaxFinder FF-120:
- Administrator user manual (207 pages) ,
- Client user manual (101 pages) ,
- Cabling manual (16 pages)
Table of Contents
Advertisement
q. In the Current Status: POTS Modem 1 screen, the "State" field should change to "Waiting for
Connect." On the phone, you should hear modem dialup/negotiation tones.
r. If you both observe the "Waiting for Connect" state and hear the tones, then the FaxFinder's Modem
has been configured properly.
If either of these is absent, see item #3 "What if the FaxFinder doesn't answer a fax call?" in Chapter
9: Troubleshooting.
s. Repeat steps 8b through 8r for each of the FaxFinder's modems (2 for the FF220; 4 for the
FF420;and 8 for the FF820). Shortcut: If you want to configure all of the modems in you FaxFinder
identically, you can click on the Update All Modems button in the Modem Configuration screen.
Multi-Tech Systems, Inc.
FF-120/220/420/820 FaxFinder Fax Server Admin User Guide
Chapter 3: Server Installation
48
Advertisement
Table of Contents
