Layout - Konica Minolta Magicolor 1650EN Reference Manual

Layout

The Layout section is used to specify the page layout when printing and the
setting for double-sided printing.
Pages per Sheet
Specifies the number of pages to be printed on one sheet of paper. For
example, if 2 is selected, two pages are printed on one sheet of paper.
Layout Direction
If you are printing more than one page per sheet, this specifies the direc-
tion and order the pages should be arranged on each sheet of paper.
Border
This prints a border around the image for each of the pages printed on
one sheet of paper when more than one page is printed on one sheet of
paper.
Two-Sided
Select the desired setting for double-sided printing.
Off:
Long-edged binding:
Short-edged binding: Double-sided printing is performed with the bind-
In order to print on both sides of the paper, the Optional Duplexer
check box must be selected under Installable Options (p. 1-45)
The Long-edged binding check box or Short-edged binding check
box can be selected even when the Optional Duplexer is not
installed. However, in this case, the print job will be cancelled.
1-54
Double-sided printing is not performed.
Double-sided printing is performed with the bind-
ing along the long edge of the paper.
ing along the short edge of the paper.
Specifying Print Settings (Mac OS X 10.4)