Using The Ethernet Menu Options; Tcp/Ip - Konica Minolta Magicolor 1650EN Reference Manual

Using the Ethernet Menu Options

If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP first.

TCP/IP

Enable
Purpose
Options
Default
IPv4-DHCP/BOOTP
Purpose
Options
Default
IPv4-IPv4 ADDRESS
Purpose
Range
Default
Ethernet Menu
Enables or disables TCP/IP.
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
YES
NO
YES
If there is a DHCP or BOOTP server on the network, speci-
fies whether the IP address and other network information
is automatically assigned by the DHCP or BOOTP server.
YES
NO
YES
Specifies the IP address of this printer on the network.
0–255 for each xxx triplet
Use the and
number; use the
lets.
192.168.001.002
keys to increase or decrease each
and keys to move between trip-
5-5