Konica Minolta Magicolor 1650EN Reference Manual page 237

Item
Toner Out Action
Density Control
Submit button
Reset button
Save Custom button
Restore Custom
button
Restore Factory
button
7-52
Description
Determines if the printer continues accepting jobs
sent to it when a toner out condition occurs.
If "Continue" is selected, printing can continued.
However the printing results are not guaranteed.
Choices: Stop, Continue
Default: Stop
Configuration Menu Equivalent:
MAIN MENU - QUALITY MENU -
TONER OUT ACTION
Adjusts toner (color) density of each color (cyan,
magenta, yellow, and black). The higher the value,
the higher the density of the color.
Range: 1 - 5
Default: 3
Saves and applies any changes made.
Resets all configuration settings to previous values.
Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back to
the Custom settings after changes are made.
Changes all settings to the Custom values.
Changes all settings to the Factory values.
Configuring the Printer (Administrator Mode)