Konica Minolta Magicolor 1650EN Reference Manual page 310

Item
Server Certificate
Check
Client Certificate
Send Client Certificate Select whether or not the client certificate is sent
Encryption Strength
Authentication
Process Time Limit
Submit button
Reset button
Configuring the Printer (Administrator Mode)
Description
Specify the items where the server certificate is ver-
ified. Specifies the server certificate check, when
EAP Method is set to EAP-TLS, EAP-TTLS or
PEAP.
Choices: Validity, CA Confidence, ServerID
Default: [None]
Shows whether or not a client certificate has been
specified. A client certificate is required when EAP
Method is set to EAP-TLS, EAP-TTLS or PEAP.
Specify the settings from the Network - SSL/
TLS page.
when the client certificate is requested by the
server. Specifies the send client certificate, when
EAP Method is set to EAP-TTLS or PEAP.
Choices: Enable, Disable
Default: Disable
Specify the encryption level of TLS packets with
EAP-TLS/TTLS/PEAP. Specifies the encryption
strength, when EAP Method is set to EAP-TLS,
EAP-TTLS, or PEAP.
Choices: Low, Medium, High
Default: Low
Specify the length of time to postpone stopping the
network when authentication fails from the start of
authentication.
Range: 0, 60 - 255 (seconds)
Default: 0
Saves and applies any changes mode.
If you made changes to any of the parameter set-
tings but don't wish to apply the changes, selecting
this button restores the last submitted parameter
settings.
7-125