PostScript
The Print - Default Setting - PostScript window provides the following
parameters for configuration. The settings are arranged in 3 columns: Cur-
rent, Custom, Factory.
Item
PS Error Page
PS Protocol Ethernet
Submit button
Reset button
Save Custom button
Configuring the Printer (User Mode)
Description
Print an error page if the print job cannot be printed
or creates an error.
Choices: On, Off
Default: On
Configuration Menu Equivalent:
MAIN MENU - SYSTEM DEFAULT -
EMULATIONS - POSTSCRIPT -
ERROR PAGE
Specifies the binary communications protocol
(BCP).
Choices: Binary, Quoted Binary
Default: Binary
Configuration Menu Equivalent:
MAIN MENU - INTERFACE MENU -
ETHERNET - PS PROTOCOL
Saves and applies any changes made.
Resets all configuration settings to previous values.
Saves the Current values of the parameters as the
Custom settings. Using the Restore Custom but-
ton, you can change the parameter settings back to
the Custom settings after changes are made.
7-35