Setup Description; Serial Communication Setup - Intermec EasyCoder PD41 User Manual

Appendix C — Setup Parameters (Fingerprint)

Setup Description

The printer's Setup parameters are used to set the printer's
operational behavior. Chapter 5, "Configuring Settings",
explains how to set or change the parameters, and this is also
explained in the Fingerprint v10.X.X Programmer's Reference
Manual, under the
Note: The recommended way to set your printer's
configuration parameters is to use the PrintSet 4
program, which is included on the PrinterCompanion
CD. PrintSet 4 can communicate with your printer
either via a serial cable or a network connection.

Serial Communication Setup

The serial communication parameters control the
communication between the printer and the connected computer
or other devices on the standard serial port, referred to as
"uart1:".
For the serial communication channel ("uart1:"), the following
parameters can be set. Make sure they match the setup of the
connected device or vice versa. If the setup of the printer and the
setup of the host do not match, the response from the printer to
host will be garbled.
Baud Rate
The baud rate is the transmission speed in bits per second. There
are 10 options:
• 300
• 600
• 1200
• 2400
• 4800
• 9600 (default)
• 19200
• 38400
• 57600
70
command.
SETUP
EasyCoder PD41 Printer User's Guide