5.10.5 Primary Hard Drive
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
(Section 5.2).
2. Prepare the workstation for disassembly (Section 5.1).
3. Remove the workstation access panel (Section 5.5).
4. Remove the front bezel (Section 5.6).
5. Raise the Easy Access drive bay to the upright position.
6. Disconnect the power cable and signal cable from the back of the drive.
Disconnecting Cables from the Hard Drive
Service and Technical Reference Guide, xw3100
Removal and Replacement Procedures
338611-001
5–21