Removal and Replacement Procedures
5.5 Workstation Access Panel
1. Prepare the workstation for disassembly (Section 5.1).
Ä
CAUTION: Before removing the workstation access panel, ensure that the workstation is turned off and
that the power cord is disconnected from the electrical outlet.
2. Pull up and hold open the latch on the top of the workstation 1.
3. Slide the workstation cover 2 back about 0.5inch (1.3 cm), then lift it off the unit.
To install the workstation cover, reverse the removal procedure.
5–6
338611-001
Service and Technical Reference Guide, xw3100