Using The Emergency Repair Diskette; Windows 2000; Converting To Ntfs; Windows Xp Professional - HP xw3100 Service And Technical Reference Manual

Installing the Operating System
1.3

Using the Emergency Repair Diskette

1.3.1 Windows 2000

1. Insert the diskette into the diskette drive and restart the workstation (on some models you
may boot to the Windows 2000 CD).
2. Press Enter to start the repair process, then choose to repair the system.
3. Select the Emergency Repair Process.
4. Follow the instructions that appear on the screen.
1.4

Converting to NTFS

1.4.1 Windows 2000
To convert an existing partition from a FAT 32 partition to an NTFS partition, double-click the
NTFS Convert icon on the desktop. Carefully read and follow the directions that appear on the
screen.

1.4.2 Windows XP Professional

The Windows XP Professional operating systems handle only NTFS-formatted drives. When
installed, XP will, if necessary, automatically convert a FAT32 drive to NTFS.
1.5

HP Software

The Microsoft Windows 2000 Professional or Windows XP Professional operating system is
preinstalled on the workstation and will be configured automatically the first time the
workstation is turned on. The following HP software will also be installed at that time on selected
models:
Computer Setup Utilities and diagnostic features
HP Support Software including device drivers
Configuration Record
Online Safety & Comfort Guide
Enhanced HP Insight Personal Edition (Diagnostics for Windows)
DMI Support
Power Management with energy saver features
Security Management tools
Software Support Management tools
1–2 338611-001 Service and Technical Reference Guide, xw3100