HP b2600 Technical Reference page 88

Remove/Replace System Components
Removing/Replacing System Components
4. Remove the PCI cage cover and disconnect the audio-extender cable from the audio card
if you have an audio cable. See Figure 3-78. Note that the audio-extender cable's
connector can be remove from the audio card by press in on the connector's latch release
and pulling outward on the cable.
Figure 3-78. Remove the PCI Cage Cover and the Audio-Extender Cable
PCI Cage Cover
5. Unscrew the bulkhead screw and remove the audio card. See Figure 3-79.
Figure 3-79. Remove the PCI Card Bulkhead Screw and Audio Card
PCI Card
Bulkhead
Screw
Audio
Card
6. Replace the bulkhead blank in the opening for slot one of the PCI cage and screw in the
bulkhead screw for the bulkhead blank. See Figure 3-80.
Figure 3-80. Replace the Bulkhead Blank in the PCI Cage
Replace bulkhead blank
88
Audio-Cable Extender
PCI
Card
Back
Edge
PCI
Slots
Screw in the bulkhead screw
Chapter 3