Remove/Replace DAT Drives
Removing the DAT Drive
6. Slide the DAT drive out of the DAT drive bay and disconnect the DAT drive power and SCSI
cables. See
Figure F-5
Figure F-5
Disconnecting the DAT Drive's Cables
Power Cable
DAT Drive
7. Unscrew the four bracket mounting screws from the DAT drive and remove the DAT drive's two
brackets. See
Figure F-6
Figure F-6
Unscrew the Four DAT Drive Bracket Mounting Screws
Bracket Mounting Screws
186
. Note that these cables are keyed for easy replacement.
.
Bracket Mounting Screws
DAT Drive
Bracket
DAT Drive
DAT Drive Bay
SCSI Cable
SCSI Terminator
DAT Drive
Bracket
Appendix F