HP b2600 Technical Reference page 48

Remove/Replace System Components
Removing/Replacing System Components
6. Disconnect the CD drive power cable, control cable, and audio cable (if an audio card is
present). See Figure 3-12. Note that these cables are keyed for easy replacement.
Figure 3-12. Disconnecting the CD Drive's Cables
Audio Cable
7. Unscrew the four CD drive mounting screws located on both sides of the CD drive bay.
See Figure 3-13.
Figure 3-13. Unscrew the Four CD Drive Mounting Screws
Mounting Screws
48
Control Cable
Power Cable
CD Drive
Bay
Mounting Screws
Chapter 3