HP b2600 Technical Reference page 203

6. Slide the flexible disk drive into the disk drive's bay and align the four mounting screw holes in
the flexible disk drive bay with the two threaded holes on both sides of the flexible disk drive.
Next, screw the four mounting screws into the threaded holes. See
Figure G-14 Screwing in the Flexible Disk Drive Bay's Mounting Screws
Flexible Disk
Drive
Flexible Disk Drive Bay
7. Replace the flexible disk drive bay's back cover. Note that this back cover snaps onto the flexible
disk drive bay. See
through the raised opening in the DAT drive bay's back cover to avoid pinching them.
Figure G-15 Replacing the Flexible Disk Drive Bay's Back Cover
Flexible Disk
Drive Bay
Appendix G
Mounting Screws
. Also, note that the power and SCSI cables must be neatly fed
Figure G-15
Remove/Replace Flexible Disk Drives
Replacing the Flexible Disk Drive
Figure G-14
SCSI Cable
Mounting
Screws
.
Flexible Disk
Drive Bay's
Back Cover
203