HP b2600 Technical Reference page 65

5. Complete the procedure in the section "Replacing the CD Drive" (steps 1 through
3; in this chapter), "Replacing the DAT Drive" (steps 1 through 5; in Appendix
F), or "Replacing the Flexible Disk Drive" (steps 1 through 5; in Appendix G).
6. Complete the procedure in the section "Replacing the PCI Cage, I/O Card and PCI
Backplane Board" (steps 1 and 2) found in this chapter.
7. Complete the procedure in the section "Replacing the Front Bezel and Top Cover"
found in this chapter.
8. Connect and turn on the power to your system.
9. Determine that your hard disk drive replacement was successful by executing the sam
command as root. When the System Administration Manager window appears,
double click the Disk and File System icon and in the window that appears double
click the Disk Devices icon. In the next window that appears, you should see your hard
disk drive listed. If it is not listed, repeat this procedure. If your hard disk drive is still
not listed, contact your local HP Support Representative.
Chapter 3
Remove/Replace System Components
Removing/Replacing System Components
65